ZIP code · Phoenix
Leak detection in 85016, Phoenix
What the Census says about the housing in 85016, and what it means for a hidden leak.
85016 covers part of Phoenix, where the typical home was built in 1976. It is the most useful thing to know about a property nobody has seen yet: build year picks the material, and here that means copper supply under the slab.
Older than three quarters of the ZIP codes on this site, 85016 carries the failures that go with that.

| What the housing in 85016 is | Figure |
|---|---|
| Median year housing was built | 1976 |
| Built before 1980 | 57 percent |
| Build era | 1970s and early 1980s |
| Built since 2000 | 22 percent |
| Likely supply material | copper supply under the slab |
| Largest decade of building | 1950s (18 percent) |
| What tends to fail first | Copper of this era usually fails where it was bent or where it rubs a rebar chair, so the leak is rarely where the wet carpet is. |
| Owner-occupied households | 51 percent |
| What we listen for | A steady escape that answers to the pressure on the line, so bleeding it down and bringing it back up confirms what is being heard |
| Single-family detached homes | 40 percent |
| Land area | about 8 square miles |
Housing figures: U.S. Census Bureau, American Community Survey 5-year estimates (2023), for ZIP Code Tabulation Area 85016. Town coverage: U.S. Census Bureau, 2020 ZCTA-to-Place relationship file.
Is the housing in 85016 all the same age?
Several. Five separate decades each account for a tenth or more of 85016. Few ZIP codes in the metro are built out over that long.
Houses of five different eras sit on the same 85016 block. The failure is often at a transition fitting where an older run meets a newer one.
With five vintages inside one boundary, 85016 is where we assume least. We test more here and guess less.
85016 is newer than 85013 next door. Does that make a leak less likely?
Not really, no. 85016 was built around 1976 and 85013 in Phoenix around 1964. Newer pipe does not corrode; it comes apart where it was joined.
The age gap of difference decides the method. 85016 gets searched at its connections. 85013, from 1964, is the opposite job.
Next door: leak detection in 85013, where the typical home dates from 1964.
Does a built-up ZIP code like 85016 make a leak harder to hear?
Noisier, which is not the same as harder. There is more housing per square mile in 85016 than almost anywhere we work. Dense ground is noisy ground.
Several sources put sound into the same 85016 slab. Trusting the first sound heard is how the wrong floor gets opened.
We eliminate before we listen. Once the loss is proved and isolated, the noise that is left is the one that matters. See acoustic leak detection and thermal imaging.
Who owns the leaking line when 85016 homes are attached?
The first question stops being where the leak is and becomes whose line it is. Only about 40 percent of the housing in 85016 is single-family detached.
Under the concrete there is no boundary. In 85016 it travels to wherever it can surface. Finding it and owning it are different things here.
We prove which line is losing water before anyone in 85016 is blamed. See HOA and community leak detection and commercial leak detection.
Why does a leak in 85016 show up so far from its source?
Because in 85016 the water has already moved by the time damp appears. The concrete decides the route, not the plumbing.
With 57 percent of 85016 predating 1980, that is most of the housing. The lifted vinyl tells you the water got there, and nothing else.
We work outwards from the line, not inwards from the stain. Sound narrows it to a point once the loss is proved. See slab leak detection.
The Biltmore area page is built on this same ZIP code’s Census figures, and goes wider than the housing data.
Straight answers
Questions we get about 85016
How old is the housing in 85016?
The U.S. Census Bureau puts the median year of construction in 85016 at 1976. It is the 2023 American Community Survey five-year estimate. It places most of the housing in the 1970s and early 1980s, which is what decides the supply material.
What kind of supply pipe is under a house in 85016?
Most likely copper supply under the slab, going by a median build year of 1976 in 85016. It is an expectation rather than a fact about any one house. A repipe, an addition or an old repair can put something else in the wall. So the line is isolated and tested under pressure before anything is opened.
Homes in 85016 share walls. How do you tell whose leak it is?
Under pressure, one line at a time, before ownership comes into it. Only about 40 percent of the housing in 85016 is single-family detached. Water moves under the concrete and surfaces where it can, not where it started.
Will you dig or open a floor in 85016 to find out where the leak is?
Not to find it, no. The line is isolated, held at pressure, traced and listened along. The whole purpose is to open one place rather than several. We will tell you what we found before anything is touched.
Where a call from 85016 normally goes next
Not sure whether it is the house or the pool in 85016?
Text us the meter reading and a picture of whatever you can see. Say how long it has been happening, and whether anything in the house changed.
5.0 on Google
What customers in the Phoenix valley have written. The words are theirs, on listings we cannot edit.
“Humberto has been amazing! Prompt, professional, and patient. He has gone above and beyond, taking the time to show me how to operate the water valves and educating me so I can continue to monitor for future leaks. He identified multiple leaks and made thoughtful recommendations.”
“Beto was very professional, thorough and patient in explaining everything he was doing and why. It was an excellent and well worth it experience, and this is saying something for an architect who had a hundred questions!”
“The owner and operator of this company is everything a contractor should be. On time, honest, competent, reachable, comprehensive. Hope to work with him again in the future.”