EPCOR Water Arizona
How do I check an EPCOR water bill and meter for a leak?
EPCOR publishes its own meter guidance, and it is the most useful thing an EPCOR customer has: the triangular dial in the middle of the meter face is the low-flow indicator, and on EPCOR's automated meters an LCD leak indicator reads off, flashing, or on continuously. That third reading, on continuously, is the one that means water has not stopped moving.
Reading the bill
A water company bill, not a city bill
EPCOR Water Arizona is a private water utility regulated by the Arizona Corporation Commission, billing monthly for water service alone.
An EPCOR bill is not a combined municipal statement, so it does not carry a city's trash or sewer charges alongside the water. That makes it easier to read for this purpose: there are fewer things on it that can move for reasons unrelated to water.
Because EPCOR is regulated by the Arizona Corporation Commission rather than by a city council, its bill carries an ACC regulatory assessment line each month and its rates are set through Commission proceedings rather than by a municipality.
EPCOR serves a number of separate Arizona districts. The Phoenix-area ones it names include Agua Fria, Anthem, Chaparral, Paradise Valley, Sun City, Sun City West and San Tan. Which district you are in is on your bill, and it is the bill that is authoritative, not a map and not us.
The cycle
Monthly
EPCOR bills monthly. As with every provider, the period runs between reads rather than across a calendar month, so a loss that begins mid-period is understated on the first bill and fully carried on the next one.
The meter
What EPCOR's own meter page tells you to look at
EPCOR describes reading the meter as being like reading the odometer of a car, in gallons. On a conventional meter face, the triangular dial in the middle is the low-flow indicator, which EPCOR also calls the leak detector. It turns at a flow far too small to move the main digits.
On EPCOR's automated meters there is an LCD leak indicator instead, and it has three states: off, flashing, or on continuously. Off means no flow has been seen. Flashing and on continuously describe increasing amounts of time during which water has kept moving. Switch everything off before reading it, or the meter is simply reporting your own household.
What the readings mean
Reading the indicator with everything off
| What the meter shows | What it means | What to do next |
|---|---|---|
| Triangular dial turning with everything off | Water is leaving on your side | Close the irrigation shut-off and read again |
| LCD leak indicator on continuously | Flow has been seen without stopping | Dye-test the toilets, then isolate the irrigation and the pool |
| Nothing moving, but the bill is high | No measurable loss at the time you looked | Check the usage across periods, and ask EPCOR about the reading |
What they publish
What EPCOR publishes
We found no leak adjustment policy published by EPCOR Water Arizona. What EPCOR does publish well is the meter guidance above, which is arguably more useful, because it puts the means of finding the leak in the customer's hands rather than describing what happens afterwards.
If you want to raise a billing question, EPCOR is the party to raise it with. Billing questions are between you and your provider, and what they do about them is theirs to decide. Our part is establishing whether the property is losing water and where, in writing.
Straight answers
EPCOR questions
What does the triangle on an EPCOR meter mean?
It is the low-flow indicator, which EPCOR also calls the leak detector. It turns at a flow too small to move the main digits, so with every fixture off, any movement means water is leaving on your side of the meter.
What does it mean when my EPCOR meter's leak indicator is on continuously?
EPCOR's automated meters show a leak indicator that is off, flashing, or on continuously, describing increasing periods during which water kept moving. On continuously is the reading that suggests a loss which has not stopped.
Is EPCOR a city utility?
No. EPCOR Water Arizona is a private water utility regulated by the Arizona Corporation Commission, which is why its bill carries an ACC regulatory assessment line and why its rates are set through Commission proceedings.
Does EPCOR publish a leak adjustment policy?
We found none published. Ask EPCOR directly what applies to your account, and take your meter readings with you.
Where we work in EPCOR districts
Tell us what the water is doing
What the triangular dial or the LCD leak indicator does with everything switched off.
Photograph your meter face
With everything switched off. The indicator is usually the whole first answer.
5.0 on Google
What customers in the Phoenix valley have written. The words are theirs, on listings we cannot edit.
“Humberto has been amazing! Prompt, professional, and patient. He has gone above and beyond, taking the time to show me how to operate the water valves and educating me so I can continue to monitor for future leaks. He identified multiple leaks and made thoughtful recommendations.”
“Beto was very professional, thorough and patient in explaining everything he was doing and why. It was an excellent and well worth it experience, and this is saying something for an architect who had a hundred questions!”
“The owner and operator of this company is everything a contractor should be. On time, honest, competent, reachable, comprehensive. Hope to work with him again in the future.”