Pool and spa leaks · Peoria
Pool and spa leak detection in Peoria
A city billed by two different water utilities, where the first question about a high bill is which company sent it.
Peoria is a split-utility city: part of it is billed by the City of Peoria and part by EPCOR Water Arizona, which serves Peoria customers through its Sonoran water district. Housing has a median year of construction of 1998, with 73 percent of units single-family and 75 percent owner-occupied.
Pool leak detection in Peoria usually means pairing a measured static loss at the pool with a consumption history from whichever of the city's two water utilities bills your address.

| Pool leaks in Peoria | What that means here |
|---|---|
| Who bills the water | A split city: some addresses are billed by the City of Peoria and some by EPCOR Water Arizona through its Sonoran water district |
| Median year built | 1998, with 73 percent of units single-family |
| Typical pool age | Pools of the late 1990s and 2000s, where plaster interfaces and skimmer throats reach their thresholds first |
| Where to start | Your own meter, read with the house closed, the irrigation shut and the pool auto-fill valve turned off |
Housing shares from U.S. Census Bureau, American Community Survey 5-year estimates (2023). The EPCOR half of the city is verified from the utility's own rates material; the city half is stated only as far as the published record supports.
Why does it matter which utility bills your address?
Because that is who holds the consumption history, and the history is what dates a leak. Some Peoria addresses are billed by the city and some by EPCOR Water Arizona through its Sonoran water district, so the same question goes to two different places depending on which side of the line you live on.
Your bill names your provider. Ask them for monthly usage set against the same months in previous years: a step change tells you when the loss started far more convincingly than a single high bill does.
What does a static loss measurement add to that?
It measures what is happening now rather than what happened last quarter. Shut the pool's auto-fill, mark the water line precisely at the tile, and read it again a day later; the fall is the pool's own loss, uncontaminated by anything indoors.
Stand a container of water in the pool at the same level and you have the evaporation control at the same time. The difference between the two marks after a day is what has to be explained by plumbing.
Where do late-1990s and 2000s pools lose water?
At the skimmer throat first, then at return fittings, the main drain and the light niche conduit. A pool from Peoria's main build period has had long enough for the joint between the skimmer body and the shell to work, but generally not long enough for the shell itself to be the problem. Plaster interfaces around fittings are the next thing we look at.
Can water be lost without ever reaching the pool?
Yes, and it is the loss people never think of. The line feeding the auto-fill runs from the house supply out to the pool, usually buried, and if it fails anywhere along that route the water goes into the ground while the pool level stays perfectly normal.
That loss shows on the meter and not at the tile line, which is the opposite of a shell leak. It is one more reason the two measurements are taken together rather than treated as alternatives.
Straight answers
Pool leak questions we get in Peoria
How do I get my water use history?
From whichever utility your bill names, because Peoria is split between the city and EPCOR Water Arizona's Sonoran district. Ask for monthly consumption compared against the same months in earlier years; a clear step up dates the start of the loss and is far more useful than one high bill.
The pool drops about an inch a day. Is that a leak?
It needs the comparison before anyone can say. Evaporation alone moves a pool measurably in Valley summers, so a container of water standing at the same level in the pool is the control: if the pool falls noticeably further than the container over one full day, the difference is a leak.
Where do pools of this age usually fail?
The skimmer throat is the most common single finding, where the plastic skimmer body meets the concrete shell. After that come return fittings, the main drain and the light niche conduit. All of them are checked with the pool full and the equipment off, so nothing has to be drained.
Pool leaks near Peoria
Peoria pool dropping?
Tell us who bills your water and how far the tile line falls over a day.
5.0 on Google
What customers in the Phoenix valley have written. The words are theirs, on listings we cannot edit.
“Humberto has been amazing! Prompt, professional, and patient. He has gone above and beyond, taking the time to show me how to operate the water valves and educating me so I can continue to monitor for future leaks. He identified multiple leaks and made thoughtful recommendations.”
“Beto was very professional, thorough and patient in explaining everything he was doing and why. It was an excellent and well worth it experience, and this is saying something for an architect who had a hundred questions!”
“The owner and operator of this company is everything a contractor should be. On time, honest, competent, reachable, comprehensive. Hope to work with him again in the future.”